Korg Nutekt NTS-1 review and tutorial

KORG NUTEKT NTS-1: Full review – Here’s everything it can do

NTS-1 is a new standalone mini synth from Korg’s Nutekt DIY brand. It’s a small but powerful digital synth that’s based on the same programmable digital oscillator and effects engines that are in Korg’s bigger Minilogue XD and Prologue synths, only this has an additional arpeggiator and digital filter.

It’s a mono synth, meaning it can only play one note at a time, but you can still use its effects to process external audio, as it has a line input.

NTS-1 arrives as a kit that you need to build yourself. It doesn’t require any soldering and everything comes included and takes less than half an hour to build. The screws that come with it are a bit tiny but luckily it comes with a tiny screw driver. Here’s my full review and walkthrough of all its features

TIMELINE:

0:00 Intro
0:30 Building NTS-1
1:10 Hardware overview
3:40 Oscillator
6:00 Osc parameters
7:10 Filters
8:15 Env generator
9:45 Mod effects
10:35 Delays
11:20 Reverbs
12:30 Arpeggiator
14:25 Audio in
15:20 Pros & cons

8 thoughts on “KORG NUTEKT NTS-1: Full review – Here’s everything it can do

  1. Hi, thank you very much for all your reviews and lessons!
    I have a question regards the Nts1.
    I haved search but cant find the answer, will the synth work as a synth when we use it as a sound/effects processor with external audio in.
    It will come out the external audio and the synth itself thru the stereo output?
    Or it bypass the synth when the audio in is used.
    I ask because I have a Monotron and I would like to use the effects of the Nts1 but also layer bouth, the Monotron and the Nts1.
    Thanks in advance and keep going with the good work.
    Best Regards

  2. Hi, thank you for the amazing videos!
    I’ve looked around but I can’t find an answer.

    Is there any program change and MIDI CCs.

    Thanks, best regards,

    1. Thanks! There are no programs so there’s no program changes. MIDI CC’s work – there’s a spec on their site

  3. Hello LOOPOP,

    Using the NTS-1 as an FX unit, for instance, could one patch the mono output of the Arturia Microbrute into the NTS-1 (using the NTS-1 FX) and then take the NTS-1 output as a proper mono signal and patch that into one of the DIGITAKT mono inputs with proper mono sound ?
    Hope my question makes sense. thank you.

Leave a Reply to loopopmusic Cancel reply

Your email address will not be published. Required fields are marked *

I accept that my given data and my IP address is sent to a server in the USA only for the purpose of spam prevention through the Akismet program.More information on Akismet and GDPR.

This site uses Akismet to reduce spam. Learn how your comment data is processed.