Contact & Privacy

I’d love to hear from you! Please mail me at:
ziv (at) loopopmusic (dot) com

Here’s some background about this site and its companion YouTube channel.

What drove me to open this site and channel is my deep appreciation for others sharing their knowledge online, and the need to reciprocate in kind. I do enjoy digging deep into what a piece of electronic music gear can do – and learning by having someone show you is the best way to do that, especially considering cryptic manuals some manufacturers create.

It almost goes without saying that aside from having someone teach you in person, YouTube is the best place to quickly find fantastic electronic music making tutorials and gear overviews.

Anyway, every now and then I discovered something that wasn’t documented or obvious – whether it was a workflow idea, or a “trick” that I felt a lot of people were struggling with (or at least I was), that has a simple but non obvious workaround. The urge to share this information is what drove the first uploads to my channel.

So, that’s how it started, but uploading into a vacuum wouldn’t have lasted long. Luckily, it’s been anything but that. The feedback and encouragement from people like you reading this, has been the ultimate motivator to keep doing this. This book is my way of saying thanks for being a part of this journey.

So what’s Loopop? Well, most electronic music gear supports some form of looping or sequencing, and if you want to know how the LOOP OPerates… or if a LOOPing idea POPs in your head, or if you take a LOOP and turn it into a POP song… well, hopefully LOOPOP will help just a bit 🙂

 

Privacy Policy

You may submit your email on this site in which case I may email you with updates every now and then. Obviously you can unsubscribe any time you like, and since I don’t want you to unsubscribe, you’ll only hear from me when I think you’ll want to…

This site uses Google Analytics to see what’s going on. This site doesn’t share personal information with third parties nor do we store any information about your visit to this blog other than to analyze and optimize your content and reading experience through the use of cookies.

You can turn off the use of cookies at anytime by changing your specific browser settings.

This privacy policy is subject to change without notice and was last updated on October 11, 2018, so you’re encouraged to check this page for any changes to the Privacy Policy. Your continued use of this site after any change in this Privacy Policy will constitute your acceptance of such change.

Ads appearing on this site may be delivered to users by advertising partners, who may set cookies. These cookies allow the ad server to recognize your computer each time they send you an online advertisement to compile information about you or others who use your computer. This information allows ad networks to, among other things, deliver targeted advertisements that they believe will be of most interest to you. This Privacy Policy covers the use of cookies by the site itself and does not cover the use of cookies by any advertisers.

We only disclose potentially personally-identifying and personally-identifying information to employees, contractors and affiliated organizations that need to know that information in order to process it on our behalf or to provide services available on this site, and that have agreed not to disclose it to others. Some of those employees, contractors and affiliated organizations may be located outside of your home country; by using this site, you consent to the transfer of such information to them. We will not rent or sell potentially personally-identifying and personally-identifying information to anyone. Other than to our employees, contractors and affiliated organizations, as described above, we will disclose potentially personally-identifying and personally-identifying information only in response to a subpoena, court order or other governmental request, or when we believe in good faith that disclosure is reasonably necessary to protect our property or rights, those of third parties or the public at large.

We take all measures reasonably necessary to protect against the unauthorized access, use, alteration or destruction of potentially personally-identifying and personally-identifying information.

If you have any questions feel free to contact us directly here: ziv (at) loopopmusic.com

Thanks for visiting!

52 thoughts on “Contact & Privacy

  1. Thanks a lot for your fantastic reviews and tutorials! Complete and to the point ! i always look to your reviews before i buy synths. My question for you. I have a Elektron Octatrack MKI. i like the sound and i see a lot of people making fantastic things on it but i don’t use it a lot because i can’t get out the PART management! I have a digitakt and it’s great and i can work with it because you have patterns. The octatrack has pattern parts in a bank and i don’t understand the point of this and how i must use it. Is it possible to make a good tutorial around this theme? I think a lot of people would appreciate such tutorial.
    I want to thank you for reading my mail and hopefully you can help me with a great tutorial around part patterns and banks on the Octatrack!

    Thanks a lot
    Melanie & Wouter
    Belgium

    1. Hi Melanie & Wouter,

      Thanks for the kind words! I haven’t gotten to the octatrack yet but it’s certainly on my to do list… I will try and find time for it!

  2. Which video? You don’t need an app to make samples longer you should sample them at double speed and play them at half speed. You can use the free app Audacity on a computer if that’s what you mean

  3. Hi,

    I responded to your video on the Behringer model D. I wanted to record my experiences in a video. Until now I used Hypercam for screen capture, which sometimes failed because it didn’t record sound (a common complaint). My guess is the configuration with a MIDI controller, hard-and software synths a webcam and a external sound card is too much for poor Hypercam. Looking for an alternative (preferably free, since I won’t use it a lot and even fear I won’t succeed recording this comparison between the model D and a VST, or even my model D and yours, using the video on YT), I noticed the reviews are written with other uses in mind (predominantly games or recording from youtube). So my question is what do you use for your recordings? Or do you know a free alternative?

    Thanks in advance.

    1. Do you mean what you can use for screen captures? I use OBS on Windows – it’s free, and so is Quicktime on Mac

      1. Thanks. That’s what I meant, yes. I’m trying to master OBS by now. The problem with hypercam2 turned out to be the ASIO, apparently to be solved by Voicemeeter (and it is).

  4. I was wondering if you have ever done a tutorial on the audio damage sequencer 1? I really enjoyed the one you did on maths I learned more about it in the short video then over a year of owning it.

    1. Hey – just saw this question – No, I’ve never reviewed Sequencer 1. Thanks for the kind words re the Maths video!

  5. Thx for your great reviews
    I would like to know what subject are include in your book, it’s any introduction for a beginner how to start patching your euro rack, what things follow the other in the patch chain?

    1. Hi! Thanks for your interest. I really should make a table of contents available – until then there’s a brief snapshot of it at the end of my videos. I’ll also consider adding a eurorack for beginners chapter to it ASAP!

  6. I would love to hire you to be my private tutor. I am fascinated by your skills intelligence and teaching ability. I have been doing rector and vcv rack for a while. I started eurorack a number of months ago. I am a 69 year old eye doctor who loves to learn. By the way Patreon keeps locking up for me.

  7. hello how do you change semitones in a live performance in the roland mc-707

    I can only change the transposition, in the mc-101 I press the note key and then the note I want on the keyboard and change the semitone

  8. Your youtube posts are such a tremendous help in any way soundwise or technical wise !!!!
    I have en ewi controller question regarding the moog sirin, since i heard the sirin has quite bad midi zippering, would it be able to use for instance a midi to cv converter like the doepfer mcv4 triggering the notes and smooth out the notes using the cv filter from the pedal to the sirin and maybe the pitch as well ?

    1. I guess you could, but I’m not familiar with any zippering. Have you experienced it or just heard it happens?

      1. i heard it happens, in the mean while i tried the microfreak ( because of the nice quality filter), and it has zippering as well in the high end, i would like to try out a midi to cv converter like kenton, in what johan berglund from the nurad ewi adviced me though,was to get one with slew rate but i can’t seem to find any which have this option, and is there a possibility to play the poly d moog polyphonically with cv.?

        and i’m still a big fan of your reviews. !!

  9. Hi. first, I love your videos – the information is on point and I learn a lot! Also, because of your good and deep explanation, I bought a Circuit Mono station. I have a have a question and I hope, you can maybe help me. I can’t synchronize the clock of my MonoStation and the circuit groove box. I was putting the auto clock of in the setup view and trying different variations of master and lave – nothing works – except putting the circuit as Master, Midi into CLOCK IN in the Mono Station – I saw the “SYN” at the grid, but it played totally fast and not in time. I was trying out with different midi cables, different breakout cables.. I contacted the novation support, but they could not help me – I don’t think they care. sadly.. Do you have any Idea?

    1. Thanks for the kind words! Sorry, a lot of people contact me with sync/troubleshooting issues and I just can’t help with setups on an individual basis otherwise there would be no channel… :/

  10. Hi – great site and reviews!

    I came here after looking around for some decent info on an SH-101 (which I found!), but in the video (the one where you compare it to a Behringer MS-101), you seem to have a couple of large screens showing the waveforms created by each.

    Can you tell me what these are? – how they hook up? – where d’ya get ’em?? . . . look so cool, and useful too 😉

    Thanks in advance!

    1. Thanks! Sorry, the screens are fake – don’t I wish they were real! I overlay scopes by Melda on the video in post production

  11. Hi,
    Love your videos! A real inspiration to me.
    Is is possible to buy your ‘In-complete book of electronic music ideas tips and tricks’ without a Patreon membership ?
    Grtz,
    Bart

    1. Thanks very much! Unfortunately, that’s currently the only way for me to make sure you get the most updated version.

  12. hi!
    thanks for your fantastic reviews?
    i have a question: I bought a behringer odyssey and poly D
    they are both great, but I don’t seem to be able to clock them to my Logic Pro x system
    I already tried via midi and the doepfer MSY2
    someone mentioned the sysex system to do that, but that seems way too complicated
    do you have any idea, cause I wanted to use both sequencers in time with my logic… 🙁
    thank you so much!!
    nico jacobs
    Antwerp
    Belgium

    1. Thanks! And sorry, I get many set up questions … if I’d start troubleshooting them all there would be no channel – I hope you understand…

  13. Just want to say how much I love your reviews and would love to know what your favorite resources on electrical music synthesis are. My wife and I just love watching your videos.

    1. Thanks so much for your comment, I really appreciate it! There’s no one resource – I do however read and watch whatever I think can learn from – there’s so much out there to explore and each person has at least one nugget of wisdom to share 🙂

  14. Hey man, love the videos! I was just curious as to what digital oscilloscope and spectrum analyzer you used. They way you crop them into your videos is a very nice touch.

  15. Hello Loopop,

    I’m a long-time fan of your work, as well as a devoted lover of all things synthesis and groovebox-based. My question for you is: how do you find time to be so dedicated and prolific? I feel this is a common problem for many people, and I’m so keen to know how to be better at this. I have all the gear I could have ever dreamed of, and my own dedicated studio, finally, after years of working and saving. But often now I’m just tired and reluctant to explore.

    Would you consider creating a video for YouTube explaining your creative process? How do you make time to be in your studio, in addition to curating so much content for your viewers? I’m sure you are quite busy with your jobs and your private life, in addition to all of this. I wish to learn how to be better at using my time and energy to synthesise, like you seem to do. The thing I love most about the synth community is their genuine desire to share and support their peers, in addition to their complete lack of ego, so I thought I’d ask these questions plainly and directly in hope of your response.

    Sincerely,

    David.

    1. Hi David,

      Thanks for the kind words. I guess your question is two fold – first, my process – I actually wrote a whole chapter (well, a few pages) about that in my book and may one day produce a video about it.

      But, I guess the more important question is my motivation, and that I think has less to do with synthesis techniques and more with psychology.

      I too am tired when I’m uninspired and find endless energy when I have something motivating me, regardless if it’s synthesis or anything else.

      I’d need much more self introspection to explain it, but if I had to sum it up now I’d say that you need to find the thing which will drive you so much that you can’t rest until you complete it.

      A tune I must play. A show I must do. A trick I must share. A synth I must cover.

      “Must” being not because someone is forcing me or paying me, but rather I must because I cannot not do it.

      Hope this helps!

      Ziv / Loopop

      1. Ziv,

        That’s a wonderful way to express it. I must synthesise because I cannot not. I understand! 🙂

        David.

  16. Hey Ziv,

    Any chance you’d consider selling a printed version of your book? Feels like it deserves a spot on my shelf. There’s all kinds of self publishing sites out there, so it shouldn’t be too hard, and I’m sure I wouldn’t be the only one buying it!

    Thanks!

    1. Thanks very much for asking. I’d love to see that on my shelf too, but I feel like I have too much to add, if I “froze” it in time I’d be selling a half baked, in-complete product… plus really the point of the subscription is to fund the continued search for ever more synthesis knowledge

  17. Hi Loopop,

    I have serious GAS for the Sequential Prophet 5/10 at the moment, but don’t have the option of testing one for myself.
    Are you planning to review one anytime soon?

    Thanks & keep up the great work!
    Conor

    1. Thanks! No plans – I had GAS for it too, hopefully it will pass for you as well… I think at the price there are better alternatives but I don’t have a sentimental attachment to the 5… if you do, it may be a problem

      1. Thanks for responding. It’s a shame you’re not planning a review, yours really are some of the best and most thorough reviews out there.
        No particular sentimental attachment for me.
        I am wanting, if not needing, an analog poly with a distinctive sound (a “presence”), a quality feel to it, including keyboard feel, and an immediate but flexible user interface (I’m not a fan of extensive/overly-complex modulation routings in a poly).
        The Prophet 5/10 appeals visually (I guess there may be some sentiment in that) but I’m still trying to assess how flexible/suitable it is sonically… and, of course, I would prefer if it was more affordable.

        Keep up the good work!

        All the best,
        Conor

  18. Hi. Love the review and tutorial videos. Their very easy to understand and very comprehensive. Keep up the great work. Could you share what you use for your real-time time domain and frequency domain analysis that I see in so many videos? It’s especially intriguing because there are note names in the frequency domain graphs. Sorry if you’ve answered this question in previous comments/videos.

    1. Thanks! I use MOscilloscope and MAnalyzer by a company called Melda – they’re free with some limitations in the MFreeFXBundle. Occasionaly I’ll use scopes by VCV

  19. Since I found your channel at the beginning of lockdown 1.0 I’ve been hooked, best electronic music gear reviews on the internet.

    I’m intrigued by the piano roll overlay on some videos – the one that shows a keyboard and vertical scrolling note hits (I.e. on the NDLR review). Could you let me know what you use for that? Thank you Loopop!

  20. Hi, great work in general, you are my goto 10 source for reviews 😉

    To that point, I searched here for some content on visualization and metering but did not spot anything. I have a nice little studio but want to dedicate a screen to visualization (metering, oscilloscope, so on). Would you be willing to share any recommendations? Some of this also just stems from missing an awesome/large meter bridge that I lost when I went ITB for recording. I wish someone made a standalone bridge but I have not found anything compelling.

    You’re the best, thanks man! – Jonathan Knorr (@djjknorr on IG)

  21. May I ask what country you live in? I’ve been wondering about that since I’ve been following your channel 🙂

  22. Hiya,
    Loving your videos, thanks so much for those, very helpful! I was wondering, what signal analyzer (oscilloscope) are you using to view wave forms?

    Thanks !

    Steve

    1. Thanks! I use MOscilloscope and MAnalyzer by a company called Melda – they’re free with some limitations in the MFreeFXBundle. Occasionaly I’ll use scopes by VCV

  23. Hi, Over the weekend I have just released a (Windows) program for generating Single Cycle Waveforms, that I have worked (on/off) for a number of years, and never released, before now. I do follow, and like your videos, so I though perhaps this program would be something of interest to you. If you are interested, it can be downloaded via the link below. The installer comes with a 170 page manual (that can be accessed from within the program), and the web-site contains links to 8 videos showcasing this software (also available via menu-items within the program).

    http://www.infinite-noise.com/WaveformGenerator.aspx

Leave a Reply to J. N. Cancel reply

Your email address will not be published. Required fields are marked *

I accept that my given data and my IP address is sent to a server in the USA only for the purpose of spam prevention through the Akismet program.More information on Akismet and GDPR.

This site uses Akismet to reduce spam. Learn how your comment data is processed.